Subaru neutral position switch

Find great deals on eBay for subaru neutral position switch. The purpose of the neutral safety switch is to prevent the car from starting. In some vehicles, the switch also monitors gear selection and reverse light feedback data for the vehicle’s computer. Most often mounted to the left-hand side of the transmission, the switch is equipped in vehicles with a transaxle or automatic transmission.

The neutral switch is the rear switch ( to the right ) in that picture.

It was easy to replace and not expensive. It can be purchased from the dealer or any of our vendors here on the board. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other. Partsgeek offers replacements for the Impreza, Forester, Legacy. We are the largest independent stockist of the Subaru Impreza transmission parts.

We have logistics in place to deliver your required orders in a fast and efficient. GENUINE SUBARU IMPREZA SPEED NEUTRAL POSITION SWITCH. Im getting the code for neutral position switch low input and cant figure out what to do, let alone understand it for the auto.

Any help appreciated since its hard to find info on this. Free Same Day Store Pickup. Check out free battery charging and engine diagnostic testing while you are in store. The position of the neutral safety switch depends on the position of your shifter.

If your shifter is on the floor or the console, the switch will be under the shifter or mounted to the transmission. The signal from the shift position switch and PNP switch depend on the position of the shift lever. The PNP signal is used to enable or disable engine starting and cruise control.

For example, when the transmission is in park or neutral , the PNP switch sends an “ON” signal to the ECM, which enables engine starting and disables cruise control. If the transmission is shifted out of park or. Our hassle free day return policy is one of the best in the industry.

AutohausAZ is dedicated to helping the do-it-yourselfer. The Engine Control Module detects the position because the continuity of the line. Following the advice of the senior Soob owners on here, I ordered and have now received the Neutral Position switch for the Legacy LS wagon. Average failure mileage is 140miles.

Your manufacturer may have. Labor costs are estimated between $and $while parts are priced at $34.

Neutral Safety Switch Replacement Cost The average cost for a Subaru Impreza WRX neutral safety switch replacement is between $and $79. The goal is to reverse the neutral position switch without having to swap the physical sensor or rig up a relay. Subaru switched the NPS hardware in 04(sti) and 06(wrx)).

Non-turbo model Gear shift position. The functionality of the neutral safety switch has changed greatly through the automotive development era, what was once a simple switch for the reverse lights and starter safety circuits, this switch has now become a multi-function gear position sensor which provides feedback data to the body and engine computers, all related functions are then carried through the operating system. All products listed on our site are inclusive of VAT at.

The price excluding VAT is shown in brackets on all pages. Shipping costs are based on individual item. When the inhibitor switch is moved to the neutral position , the circuit is completed to ground. When this happens, current will flow through the bulb in the combination meter, and the bulb will light up. The ECU again supplies a voltage at the neutral switch pin.

When the circuit is grounde the voltage reading at pin of the Bconnector will be 0v.