Carver cascade 2 fusible plug

Find great deals on eBay for carver cascade fusible plug. Every one is manufactured to the. On 240V mains assuming it has this facility, the time can be somewhat longer or shorter depending on the wattage (630w 3amp to 840w 5amp) of the element fitte you can use both gas and electric together for faster times.

INSTALLATION AND USER INSTRUCTIONS. Leave these instructions with the appliance.

Pressure relief valve set at 2. The Cascade and Cascade GE are approved to the relevant sections of B. The National Measurement Accreditation Service (NAMAS), and are manufactured to B. It is installed through the wall of the caravan and from the outside only the balanced flue is visible. All the pipes are tight too. The leak feels like it is coming from the join between the main tank and where it joins the back of the burner.

Gas pressure regulators and power supply products round off our extensive product range.

This describes how to dismantle the gas heating components, and how I resolved the problem I had on my water heater. I had a intermittent problem of the gas igniting ok, but then the gas switched. A inline blade fuse connected to control box and battery. C both venting onto burner Other features The electronic burner control features protection against flame failure, gas supply interruption and low voltage INST.

I have bled the water system so that water runs clean through both hot taps and the gas is on and running. I switch on the carver gas switch and the green light comes on. If I remove the drain plug there is no pressure relief valve etc.

Water is not coming in the inlet. I can see the white ball on the inlet non return valve. If I press on this ball water flows toward the heater perfectly. Parts include drain plugs , water inlets with non-return valve, hot water fulham outlets and pressure relief valves.

Ensure that the rubber O rings are. CARVER CASCADE WATER HEATER FUSIBLE PLUG CARAVAN CAMPER MOTORHOME HORSEBOX. Always assuming you can remove the broken remains, it is not difficult to get a replacement plug online.

The non return valve is inaccessible due to the water heaters position. The heater may need to be removed.

Tools:Philips head screwdriver,20mm,17mm spanners,electrical screwdriver,flat head screwdriver. Carver boiler in our caravan packed up. Old style pressure relief valve has been discontinued. This is the new version with fast-drain nozzle. A fusible plug located behind the cowl.

Open all hot and cold taps and shower heads. The guarantee is liable for all manufacturing faults and defective components. Using a flat bladed screwdriver. The DC voltage is below the 10.