Guitar treble bleed

UNDERSTANDING THE TREBLE BLEED MOD. Find great deals on eBay for treble bleed kit. Standard in all American Professional Series guitars, this simple mod can help your tone at all volumes.

Treble bleed circuits reduce the effects of turning the volume control on brightness. Simple capacitor and resistor circuits can make a world of difference. I think the too main problems above are trying to replicate it with, one, a Strat, and two, without a cranked AC30. His guitar varies drastically from a Strat.

The capacitor value sets the frequency above which the capacitor passes signal, The higher the value, the lower the frequency. An easy mod for your volume control to get more uniform guitar tone from to 10. CTS 500K Audio Taper Pro Guitar Pot with the PMT V-Treb variable treble bleed circuit pre-installed. The treble bleed mod As you probably already knew before our little demonstration, backing off the volume knob attenuates the pickups’ high-frequency output. It cuts more treble than bass, leaving you with blan if not barren, tone.

With a tone control, the capacitor shunts high frequencies away from your guitar ’s output, which creates a bassier sound. One of the major downsides of many modern guitar wiring setups is the frustration of losing the high end frequencies as the volume control is rolled down, resulting. Treble Bleed Circuit Made with a 470pf Polystyrene Cap and a 1. The term “super strat” originated in the ’80s when fans of shredding guitar started outfitting stock Fender Strats with a. At maximum volume, a guitar pickup interacts with the impedances of the pots and other components, the cord capacitance and the amp input to give a characteristic. To properly adjust your circuit, plug your guitar into the amp, turn the guitar volume control down to around and adjust the trim pot with a screwdriver.

Turning the trim pot counter-clockwise will add more treble , turning clockwise will reduce it. Over a year ago I switched to a tele for full time gigging (really my only guitar ) and lots of hard rock stuff. Put in a resistor and cap for the treble thing and.

A great mod for the practise room. In basic terms, this mod stops your tone disappearing when you roll off the volume. Keeps your brights Bright, and your guitar.

Both treble bleed circuits are well voice and once again we find ourselves plugging directly into a tweedy combo with a smidgen of reverb and finding that a good guitar with a variety of great tones onboard and a volume control that doesn’t make things muddy when it’s backed off is all the pedalboard we need. I keep hearing people talk about doing a treble bleed. I am getting my pots,capacitors and wires changed next week.

Lizardkinged suggested the treble bleed mod. I started my research and here is the result easy easy easy and so worth it. I had on hand the cheap ceramic caps w. The treble bleed circuit is one of the easiest mods that you can perform on your guitar , but it is also a mod that might require extensive experimenting before you. Just run a wire from the outside lug of the volume pot to the middle lug of the tone pot.

The values for what works for each guitar can swing wildly. Each guitar will be different in what it requires. Strats tend to need lower values, ifyou use one with a value too high, it.

If you ever get frustrated at the muddy, foggy and dark tone you produce when you roll back the volume control, adding a treble bleed kit to the volume pot retains the high end frequencies when the volume is decreased resulting in a cleaner, rounder sound.