Adding remote control volume to old amplifier

Just need to know if this is possible. I have an old amplifier that does not have any remote control. Guess the challenge would be to not degrade. I have been looking for a remote to control the volume on my old amp.

This is the only gadget I could find on the whole internet!

Easy to install and works as advertised. Should have bought this years ago. It needs a 9-15V DC supply which should be available within the amplifier. You can control it using a standard preprogrammed remote control.

I am feeding my digital sources (squeezebox and samsung tv (optical out) into a Peachtree Deccowhich is my DAC and pre and what I use for volume control. I then pre out into the marantz for pre and amp. Optimally I would keep the Deccoas a DAC and use tape out into the Marantz and control the volume there.

The receiver (or integrated amp ) will then be your master volume knob, be it from the front panel or the remote , for whatever device you have selected via its input control , and will then send that preamplified signal, at the volume you like, out the preamp out jacks on the back panel off to the inputs of your self amplified speakers.

Increase the volume of your Windows with the best Windows volume booster. Using the audio out jacks on a television with standard cables to an amplifier enables the volume buttons on the TV or the remote control to increase or decrease the sound level of external speakers. Invite a friend round and ask him to turn the volume down.

Adding wireless controls to vintage. Then turn it up with your remote when he’s not looking and say ‘Please can. It is a volume control module which controls the volume and mute and even has gain. All the electronics can be purchased at radio shack the only thing you will probably have trouble finding is a housing for all the electronics.

When I made mine, I had an old tin box that I got off a broken TV set and its rare to come across so just try and find an alternative like perhaps a wooden pox or an. Basic volume knob can be put on this, IR window like QED WM2 or a seriously posh multi room system, or you can simply join the wires and run a stereo amp in the hub to each room with no control. Get the wiring right and save yourself a fortune or grave disappointment later.

Many amp kits and DIY projects would benefit by having a volume control. Here is how to select the potentiometer for the job. The Placette Audio Remote Volume Control is simplicity itself: a paperback-sized black box with one set of unbalanced inputs and outputs, a toggle switch (and a remote ) to change the level, and a row of LEDs that light up to indicate the relative volume level. The signal path, too, is simple, with only a stepped attenuator between input and output. The Remote Gain Control Module is also an ideal product to add IR remote volume control to a stereo receiver or integrated amplifier that was built without it.

The IR Programmer Remote is required for setting up and controlling the Remote Gain Control Module and is sold separately. Ever wished your amplifier had remote control for the volume ?

Now you can easily add IR remote control to most amplifiers with this simple device. It has two phono sockets for line in and two for line out. Simply connect it in line, position the IR receiver wherever you find convenient and have easy volume adjustment. LEDs for power and confirmation of up and down commands. The universal remote volume buttons still control the TV volume ! So how is it supposed to control my amp ? I can also select the Sky box via the universal remote setup and click Sync with TV power so it turns on when the TV turns on.

This could result in damage to your amplifier. TW control then you are only going to get a master volume change at best anyway, any fiddling with indivdual channel volumes are going to need the amp remote whatever. For example, your volume control is limited to the volume set in the main room.

Find everything for your amp here. Low Prices on Remotes Control. If you can control external 5.