Find great deals on eBay for tdinjector loom and tdinjector harness. Yet another common issue with the Disco TDis the Fuel injector harness leaking and allowing oil to pass down the loom and into the ECU. A trouble discovery LRTV have recently come across.
Non start with oil in the wiring loom right up to the ECM. This is how to replace the injector wiring loom on a TDengine.
Symptoms of wiring loom failure is a misfire (not a backfire), when accelerating. TDinjector loom - Defender Forum - LR4x- The. TDInjectors wiring loom - International Forum.
Hey guys, Me injector loom is fecked. The obvious way to know of a wiring loom failure is through a misfire (not a backfire) when accelerating. A quickie to show you what lets the oil through the Tdinjector loom making the engine cut out, misfire or not run at all.
Voice of Steve, workshop technican at Britpart shows which seal causes. This wiring harness is a common problem.
Replacing the injector harness is an easy and cost effective way of preventing costly damage. Chasing a source for the injector loom for a TD5. The TDengine has for its time a modern electronic injector system where the injectors are fitted inside the engine and the fuel supply to them comes.
Common item to fail and cause a missfire. I had this problem on my TDDiscovery, which differs from the TDdefender only in the location of the ECU. Hi, Anybody got any top tops for changing the wiring loom for the injectors for the TDand cleaning out the wiring? Ive done a few but just wondered what other do.
Few pics below, the oil (or fuel) that came out of the red injector loom in the end covered most of the underseat box (should stop it rusting). A brand new, replacement fuel injector harness. The fuel injector harness is located under the rocker cover and is prone to oil ingress that.
First job of the week was removing old waxoyl and factory applied stone chipping material. When perusing the workshop manual, I noticed that Land Rover recommend. UK and worldwide mail order.
The guys are getting very clever. There are two looms, a injector loom and then the main loom -this is the one with the oil. Some guys cut slots in the loom , but alas.
Treat as a servicable item and do some preventative maintanance and you should never have a problem. Just changing the injector loom should do the trick. This is due to oil contamination of the fuel injector harness and ECU plug.
Tdengines can produce crank case pressure forcing oil into the injector loom sending it all the way to the ECU, this then can play havoc with the running off the. Free delivery on eligible orders. Discovery Repairs – Fuel Injector Loom Harness A well reported issue on the Tdengine is a misfire which is caused by oil forcing its way down the injector harness and into the ECU. Then the other pictures show the engine with loom removed and then the new one fitted.
Remove the soundproof cover, then the rocker cover. Loosen the soundproofing along the back on the engine, this will help you put the rocker cover back on once the loom is changed. FREE UK Delivery on order over £95.
Discovery TdNew fan belt, this fits vehicles without Air Con and without ACE active ride.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.