Goldenjacks attenuators

Find great deals on eBay for goldenjacks attenuators. Cons - The units are a little long and may cause some issues in some installations. A common issue with connecting modern sources is the output level they expect all. GOLDENJACKS audio attenuator for optimal sound - attenuators supplied. For amplifiers of sensitivity between 500.

Since most audio equipment is stereo, the most common kind is a dual gang type, which bonds two attenuators together. Ithought the GJs were the best out there, I tried the RA attenuated cables, but they were bad news - sluggish and muffled compared to the same cable unattenuated. I can see why you would need them between the sources and the input to the preamp.

High quality, close tolerance attenuators giving a 10dB reduction in signal amplitude. I bought the comparable goldenjacks attenuators on eBay and did not notice any difference other than the lower volume level. Made my volume control much more effective.

Very high quality construction for less than the Rothwells. Search goldenjacks on eBay. I have no affiliation with this seller other than as a satisfied customer.

I am looking for some attenuators to go between my pre and power amp. Looking for a value of 6db or 10db. If you want to view any of the resources below on your monitor, we recommend that you click on the HTML version of the resource.

For printing or archiving we recommend downloading the PDF version. A pre-amp increases gain - impedance a lot more and adds a lot of extra un-needed circulatory. Attenuators increase impedance - however that is a couple of resistors. Goldenjacks audio attenuator for optimal sound - 2. GoldenJacks is a small company based out of the UK.

I recently acquired a new Burson PI-1and it leaves the older unit (which I have) in the dust. Burson says that the signal is at its weakest when going through the volume control and tried and tossed out a remote in favor of the attenuator. The Harrisons fogged up the mids and the Rothwells. One pair of goldenjacks -14db rca in-line attenuators as pictured. Complete with original case and accessories.

Too much gain in your system? You have to wait through quite a bit of burn in for the dynamics of the sound to get back to normal though. Transporter Built-in Attenuation The Transporter provides built-in line level attenuation for the RCA unbalanced connectors. These cost £1to buy new. I have the goldenjacks attenuators (search ebay for goldenjacks. reverse config (they plug into the CD out not the amp in).

While the effect is not totally positive. My current favorite is the iFi micro iDSD Black Label. Welcome to USAudioMart, a classifieds site for used audio and hifi. Postings are free for hobbyists.

I suspect that this will be the reason. This was RA thinking behind the attenuators whether he understands the technical side properly. The asking price is the main problem.

I think whether the benefit outweighs the downside is system dependent. They can reduce digital fatigue even if they alter the sound by smoothing dynamics. This is likely never a problem with NVA amps.