Classic mini bulkhead

Find great deals on eBay for classic mini bulkhead and classic mini shell. Some Safari browsers are failing to connect secured pages Try the following: - refresh the page a few time to see if the page loads, if this fails please update the. The Bulkhead is the panel that stretches from the windscreen to the bottom of the car and is all that protects you from the engine. Needless to say these are structurally important parts of the car and if the bulkhead goes it will be costly. Brass bulkhead wall lamps.

Vintage marine industrial outdoor made to last.

Our aim is to offer our customers a good friendly service providing you with high quality products at reasonable prices. Bulkhead Sound Insulation (engine bay) Bulkhead Sound Insulation (engine bay) larger view. If you order your items before 4pm your order.

VAT) This replaces the sponge type sound deadening pad used on later cars by the factory. This steel box is a vital for fitting a weber carb to the Mini. It allows for the clearance of the carb and the air filter by cutting a hole in the bulkhead and mounting the box inside. Our kits can dramatically reduce noise, vibrations and also airborne noise created by the engine and from the vehicle.

Heater parts and heating system spares for the Mini.

Now its time to attack the spreader plate on the end of the front crossmember bulkhead. Mini Crossmember and spreader. Classic mini bulkhead sound proofing, this is the fire retardant felt which is located behind the carburettor on the bulkhead panel on all MKonwards. This is the crossmember for the dash at the back of the engine bay which holds the master cylinders. The outer stops at the bulkhead , you will find it has a sleeve to slide into it.

Then the innder goes through and clips over the top of the pedal, with a silver. Ideal if you are wanting to contain some of the noise from the engine bay. Made from fire retardant fabric.

Can be fitted with spray glue. The main part of the job is hacking out a sizeable chunk of the bulkhead to fit the box which makes room for the turbo. Rust Detection, Prevention and Repair for Classic Minis Rust and Minis have a great affinity for each other.

Sooner or later all owners of non-restored old Minis will have to tackle this problem. This article covers rust detection,. This box is fitted in the bulkhead to allow fitment of DCOE Weber carburetor with long competition type inlet manifold and Air Box, Specially folded to fit the bulkhead. The insulation pad is pre-cut to suit the bulkhead layout.

I was born in the wrong family, lol. So a new Bulkhead to X-Member Support Bracket was fitted after the rust on the cross-member had been treated: The steering rack bracket was removed to allow any rust to be treated. The existing bracket was later refitted after being treated and painted.

Work continues on the front end. RH Inner wing are welded in place. To give you the best possible experience, this site uses cookies. Continuing to use aomlighting.