Engine speed sensor g28

Engines not starting Possible Causes. Hi guys, Had my first ever proper breakdown the other day. My Passat just simply cut out whilst stationary at some lights with the engine management garage message on. The engine continued to run ok but the glow plug.

There have been a few threads asking about the Gsensor on the common-rail cars but there wasn’t really any straightforward information about it.

What could be the possible cause? The CPS is always low down on the engine block at. A Mechanic Will Answer in Minutes! Questions Answered Every Seconds. Car Mechanics are Online Now.

Get 1-on-Help from a Mechanic. Verified Mechanics are Online Now! Be Connected Online in Minutes!

Get a 1-on-Help Online Now. Experts are Ready to Help. It starts up fine and drives ok as long I go. V60) static, output open.

Ok, so during the summer of last year I had a problem with my Gengine speed sensor , where it was causing lengthy starts. I replaced it, and all was well for the. By continuing to use this site, you are agreeing to our use of cookies. Hello, Does anyone have an idea what could be going on?

This car, when new, had issue of bolt coming loose of oil pump chain. Since then, even today, still running. I initially had removed it from underneath the car (belly pan on). After I finished taking out the. Feel the price difference.

Right, it took me 25mins just to get the car started at work. Hi, Cut a long story short. When Im driving, the car tends to cut out and the battery light comes up and all dials just fail apart from only the speedo.

Search for engine speed sensor Gin the forums and there are a few threads with details. Just to confirm now Im home, the fault relates to the engine speed sensor G, VW call this sensor the Camshaft position Sensor , fitted to the right of the rocker cover. Answered by a verified VW Mechanic We use cookies to give you the best possible experience on our website. Hello can anybody on here help me locate the engine speed sensor (g) as im looking into my ongoing problem into the poor running of my car, i thought the cam.

I disconnected the DME and probed the G(Pine and 90) with the O-Scope. In most situations you can buy a Square Trade warranty on the item for a small fee. Done it a few times Its a magnetic sensor , and will look for pulses against the notch on the flywheel as it rotates.