Treble bleed circuit

Standard in all American Professional Series guitars, this simple mod can help your tone at all volumes. Our variable treble bleed circuit is one of the most useful mods on the market. Typically, a treble bleed mod consists of a capacitor and a resistor, but with so many. UNDERSTANDING THE TREBLE BLEED MOD.

At maximum volume, a guitar pickup interacts with the impedances of the pots and other components, the cord capacitance and the amp input to give a characteristic. The capacitor value sets the frequency above which the capacitor passes signal, The higher the value, the lower the frequency.

Treble bleed circuits reduce the effects of turning the volume control on brightness. Simple capacitor and resistor circuits can make a world of difference. A treble bleed circuit is fairly simple and easy to install. An easy mod for your volume control to get more uniform guitar tone from to 10.

If you experience tonal change when turning down the volume control on your guitar, the Fender Tone Saver is a great solution. Unlike traditional treble bleed circuits that involve connecting tiny. The third reason is the one I’ll be talking about first.

Typically humbuckers sound better with 500K pots and single coils sound better with 250K pots.

Microfarad Treble Bleed Capacitors $2. The treble bleed circuit is one of the easiest mods that you can perform on your guitar, but it is also a mod that might require extensive experimenting before you. I just tune the treble bleed for each of my Gibsons - LPs, a 33 and SG.

It opens up so many tonal variations, especially when blended with the bridge pickup. Leaving the resistor out of the circuit allows the bass cut to increase significantly as the volume is turned down, which can be a good thing or bad thing depending on the guitar. A Treble Bleed Modification allows you to roll off your volume without losing the highs. We’ll add a treble bleed circuit to your guitar. It will preserve high end.

The treble bleed mod As you probably already knew before our little demonstration, backing off the volume knob attenuates the pickups’ high-frequency output. It cuts more treble than bass, leaving you with blan if not barren, tone. Once installed in an active circuit , the capacitor only passes the high end frequencies. With the treble bleed circuit , the capacitor shunts high frequencies across the volume control and directly to the output.

So, even though you’re turning down the pickup volume, you’re not turning down the high frequencies as much. Please take seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more! Therefore, as you roll back the volume control certain frequencies are allowed to pass to the output while others must go through the pot. The bypassed frequencies remain stronger in output.

Fender have recently marketed a “Tone Saver” that they sometimes claim is not a simple treble bleed circuit , sometimes claim is a simple treble bleed circuit.

Hi moose212- Thanks for posting that. Emerson Custom Treble Bleed Circuit - Volume Mod - The Emerson Custom Treble Bleed Circuit - Volume Mod allows you to change the way the volume pot works on your guitar. The “Super Strat” Treble Bleed The term “super strat” originated in the ’80s when fans of shredding guitar started outfitting stock Fender Strats with a humbucker or two (often with toggles for tapping or splitting the coils) and a double-locking tremolo like those from Kahler and Floyd Rose.

Treble Bleed Circuit Made with a 470pf Polystyrene Cap and a 1. This simulation includes the.