Contact cleaner for guitar pots

I use DeoxIt Dbut I doubt you can spray from the front of it. You need to reach the carbon trace witch is enclosed to protect it from dirt. Perfect for contact cleaning , this cleaner also reduces RFI and allows for cleaner audio and video quality. With its special threaded chamfered edge you can attach the cap to the shortest of the available pot threads with a quarter turn. Simply remove the control knob and screw on the stainless steel Pot Cleaning Cap.

An access hole guides your spray cleaner extension tube directly to the pot shaft. So I sprayed a liberal amount of Lloyds electrical contact cleaner to the inside of the scratchy volume pot on my vmnt and now it spins 3degrees wi. Are there any brands of contact cleaner I should buy.

I got the straw tube from my can of WDand whittled it down to fit into the contact cleaners nozzle. The easiest way to clean noisy control pots , without extracting them from a guitar , amp, or stomp-box! Works for rotary switches and Gibson Varitone switches, too. This originally was to make flux remover, but I discovered it also makes a GREAT contact cleaner ! Using the same process as with the air duster apply the contact cleaner and turn the pot or push the fader to work the compound in. Repeat step to clean out any bound-on dirt that may have been loosened by the first application.

Always protect the finish with a cloth when cleaning pots and switches. I use Kontakt for switch cleaner , and Servisol Super for pots. Usually theres tabs that you can prise up and lift the pots track assembly out and if you are careful and have nimble fingers then you can use it sparingly to clean up the tracks and the contact pads reinsert and bend the tabs back into place its pretty quick fix once youve done a couple.

In order to clean the pot you will need to spray contact cleaner into the opening of the case. I prefer DeoxIT as it comes in both a spray, which adds pressure to. When you clean pots ONLY use a lubricating contact cleaner designed to clean and lubricate pots. If it went years before getting scratchy, you can get another couple of years out of it before it needs replacement. Black Beauty” Sprague caps.

The best cheapest most available thing to use for contact cleaner is Non Chlorinated Brake Cleaner. I have used it for every cleaning need in guitars, amplifiers, and before any soldering connections. Pot cleaners have lubricants, either silicone or mineral oil. Both work very well but they are used for different applications. Most guitar pots should be dry pots.

Some mixer and amp pots like the old Tapco mixers were. The pots are inside the bass, which is enclosed. Caig DeOxit and the CRC contact cleaners are goo known products.

The Blue Shower is extremely aggressive and at its best for cleaning boards and mechanisms and can be extremely harsh on pots if it gets in there. Otherwise I use Servisol contact cleaner. I clean all the pots when servicing the amp. Using an electronic tuner cleaner , put the plastic tube on the end of the spray can and.

I just knew somebody would suggest a gatefold LP cover. DeOxIT from CAIG Laboratories is widely regarded as the best potentiometer deoxidizer and cleaner. TV mechanical tuner and switch cleaners may also work.

After cleaning, lubricate the potentiometer with some type of oil to protect the resistive film and wiper contacts from the air to prevent future oxidation.