Ford focus fuel additive control module

L Diesel Sign in to follow this. By KiwiPolish, October 27. Hello friends, I am trying to do DPF off on this car. I got the correct map,but I was wondering is it necessary to unplug fuel additive control module when doing DPF. When the fuel additive control module detects that the fuel additive amount is empty, the fuel additive control module sends a signal to instrument cluster and PCM.

When the PCM receives the signal the PCM determines that the fuel additive control module lights up the PCL lamp.

Took the car in to Hartwells Ford in Banbury. Both come back after restarting. Hi All, can anyone help please? The additive system consists of a fuel additive system module , fuel additive tank fuel tank line and a fuel additive tank with integral dosing pump. The fuel additive fluid is used to lower the combustion temperature of the unburnt fuel residues inside the DPF.

The additive flui which contains cerium and iron must be exactly mixed with the fuel in the main fuel tank to achieve the right. I looked at the rear seats, but did not find it. Should metal protection under the seat be.

Save focus fuel additive to get e-mail alerts and updates on your eBay Feed.

Unfollow focus fuel additive to stop getting updates on your eBay feed. Someone please help, I have a focus 1. Fuel Additive Control Module ? AM) BMW_Hadders Wrote: Just a quick update. The car runs perfectly but this light is bugging me and my customer. It also stores DTC(s) for the fuel additive system. FORD FOCUS II Estate (DA_) 1. They only took an hour to re-fill the additive for me and that included a visual once over of the whole car with a written report.

They charged me £1pounds all in which I think is pretty good. If the PCM received the signal, the PCM determines that the fuel additive control module requests the PCL lamp to ON. There have been success stories of people adding cruise control to cars, and enabling it using ELMConfig.

Other types of fuel additives can also be introduced in to the fuel supply system using the fuel additive control system, depending upon vehicle make and model. CAN is the abbreviation for controller area network. UK ONLINE Ford Focus Door Hatchback 1. ZETEC PARTS SUPPLIERS: All Used Ford Focus Door Hatchback 1. ZETEC Parts stocked through our network are 1 guaranteed which means we offer you a first class service as one of our valued customers and have a whole range of Engines, Gearboxes and many other New Parts to satisfy your requirements. This is a very quick and simple procedure using a modified ELM cable and the free software FORScan.

A defective fuel pump can cause a no-start condition or poor engine performance.

Find guaranteed Ford Focus C-Max parts and spares ready for delivery, or collection to get you back on the road. The fuel flap magnet sensor detects how many times the fuel tank is fuelled this is part of the calculations that the PCM and additive module use. Ford Focus powertrain control modules are designed to free your engine from its restrictive stock settings. After you install your Focus PCM, you get a whole new thrill when you stomp on the accelerator.

And remember, not only do we guarantee you the. Ford policy is one of continuous product development. The right is reserved to change specifications, colours of the models and items illustrated and described on this website at any time. The fuel pump relay is usually controlled by the ignition or Powertrain Control Module , and when switched on, will provide current to the fuel pump so that it may function. As the fuel pump relay controls power to the fuel pump, any faults with it can cause issues with the fuel pump, which can cause drivability problems for the vehicle.

However, I have had another problem with my Ford Focus that I researched and found that many more people are having the same or similar problem with their fuel tank collapsing and needing to replace most of the components in the entire fuel system. I had the purge valve replaced as.